Adjusting the settings
■ Adjusting the temperature setting
Turn the temperature control dial clockwise (warm) or counterclockwise (cool).
If is not pressed, the system will blow ambient temperature air or heated air.
For quick cooling, turn the temperature control dial to the MAX A/C position.
The air conditioning will automatically turn on and the air intake selector will be set to recirculated air mode.
■ Adjusting the fan speed
Turn the fan speed control dial clockwise (increase) or counterclockwise (decrease).
Set the dial to OFF to turn the fan off.
■ Selecting the air outlet
Set the air outlet selection dial to an appropriate position.
The positions between the air outlet selections shown below can also be selected for more detailed adjustment.
When the dial is set to , air flows to the upper body.
Double Cab models only
When the dial is set to , air flows to the upper body and feet.
Double Cab models only
When the dial is set to , air flows to the feet.
Double Cab models only
When the dial is set to , air flows to the feet and the windshield defogger operates.
The air intake selector is automatically set to outside air mode.
In this position, the air intake selector cannot be changed to the recirculated air mode.
When the dial is set to , air flows to the windshield and side windows.
The air intake selector is automatically set to outside air mode.
In this position, the air intake selector cannot be changed to the recirculated air mode.
■ Switching between outside air and recirculated air modes
Press .
The mode switches between (outside air mode) and (recirculated air mode) each time the switch is pressed.
Transfer Case Rear Oil Seal
Components
COMPONENTS
ILLUSTRATION
Replacement
REPLACEMENT
PROCEDURE
1. DRAIN TRANSFER OIL
2. REMOVE PROPELLER WITH CENTER BEARING SHAFT ASSEMBLY
(See page )
3. REMOVE OUTPUT SHAFT COMPANION FLANGE SUB-ASSEMBLY
4. REMOVE TRANSFER EXTENSION HOUSING TYPE T OIL SEAL
( ...
Theft deterrent system
Engine immobilizer system
The vehicle’s keys have built-in transponder chips that prevent the engine from
starting if the key has not been previously registered in the vehicle’s on-board
computer.
Never leave the keys inside the vehicle when you leave the vehicle.
The indicator light fl ...
Steering Angle Sensor Output Malfunction (C1434)
DESCRIPTION
Steering angle sensor signals are input to the skid control ECU (brake actuator
assembly) via the CAN communication system.
HINT:
When a malfunction occurs in the communication line to the steering angle sensor,
U0126 is output. If a DTC related to the CAN communication line is ou ...