DESCRIPTION
This DTC is output when the VSC system detects a malfunction in the ABS system. When DTC 43 is stored, there is no malfunction in the skid control ECU (master cylinder solenoid).
DTC No. |
DTC Detecting Condition |
Trouble Areas |
---|---|---|
43 |
ABS control system abnormal |
ABS control system |
PROCEDURE
1. |
CHECK DTC (ABS) |
(a) Clear the DTC (See page ).
(b) Turn the ignition switch to ON.
(c) Check if the relating to ABS control system DTC is recorded (See page ).
Result |
Proceed to |
---|---|
DTC output (relating to ABS control system DTC) |
A |
DTC not output (relating to ABS control system DTC) |
B |
A |
REPAIR CIRCUITS INDICATED BY OUTPUT DTCS |
B |
END |
On-vehicle Inspection
ON-VEHICLE INSPECTION
PROCEDURE
1. INSPECT FRONT SEAT AIRBAG ASSEMBLY LH (for Vehicle not Involved in Collision)
(a) Perform a diagnostic system check (See page
).
(b) With the front seat airbag assembly LH installed on the vehicle, perfor ...
Motor Circuit Malfunction (C1428)
DESCRIPTION
DTC No.
Detection Item
DTC Detection Condition
Trouble Area
C1428
Motor Circuit Malfunction
With the motor relay and motor fail-safe relay OFF, open or short in
motor circuit continues for 2 seconds o ...
Inspection
INSPECTION
PROCEDURE
1. INSPECT FUEL DELIVERY PIPE SUB-ASSEMBLY LH (FUEL PRESSURE SENSOR)
NOTICE:
Do not remove the fuel pressure sensor from the fuel delivery pipe sub-assembly
LH.
If a fuel pressure sensor is removed, replace the fuel delivery pipe
sub-assembly LH with a ne ...