DESCRIPTION
These DTCs are stored when a malfunction occurs in the antenna assembly with holder which is connected to the radio and display receiver assembly.
|
DTC No. |
DTC Detection Condition |
Trouble Area |
|---|---|---|
|
B15FE |
The antenna assembly with holder is not connected. |
|
|
B15FF |
A short occurs in the antenna assembly with holder. |
CAUTION / NOTICE / HINT
NOTICE:
After replacing the stereo component tuner assembly of vehicles subscribed to pay-type satellite radio broadcasts, XM radio ID registration is necessary.
PROCEDURE
|
1. |
REPLACE ANTENNA CORD SUB-ASSEMBLY |
(a) Replace the antenna cord sub-assembly with a known good one and check if
the same DTC is output again (See page .gif)
).
(1) Clear the DTCs (See page ).
(2) Recheck for DTCs and check if the same DTC is output again.
OK:
No DTCs are output.
| OK | .gif) |
END |
|
.gif)
|
2. |
REPLACE NO. 2 ANTENNA CORD SUB-ASSEMBLY |
(a) Replace the No. 2 antenna cord sub-assembly with a known good one and check
if the same DTC is output again (See page ).
(1) Clear the DTCs (See page ).
(2) Recheck for DTCs and check if the same DTC is output again.
OK:
No DTCs are output.
| OK | |
END |
|
|
3. |
REPLACE ANTENNA ASSEMBLY WITH HOLDER |
(a) Replace the antenna assembly with holder with a known good one and check
if the same DTC is output again (See page ).
(1) Clear the DTCs (See page ).
(2) Recheck for DTCs and check if the same DTC is output again.
OK:
No DTCs are output.
| OK | |
END |
| NG | |
REPLACE STEREO COMPONENT TUNER ASSEMBLY |
