TTGuideTacoma manuals & technical reference
Toyota Tacoma (2015-2018) Service Manual / Audio / Video / Satellite Radio Tuner

Toyota Tacoma (2015-2018) Service Manual: Satellite Radio Tuner

Components

COMPONENTS

ILLUSTRATION

Removal

Removal

REMOVAL

PROCEDURE

1. REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET

(See page 2. REMOVE NO. 1 NAVIGATION WIRE )

2. REMOVE NO. 1 NAVIGATION WIRE

(a) Disconnect the 6 connectors to remove the No. 1 navigation wire.

3. REMOVE NO. 1 RADIO RECEIVER BRACKET

(a) Remove the 5 bolts and No. 1 radio receiver bracket.

4. REMOVE NO. 2 RADIO RECEIVER BRACKET

(a) Remove the 5 bolts and No. 2 radio receiver bracket.

5. REMOVE STEREO COMPONENT TUNER ASSEMBLY

(a) Disengage the 2 guides to remove the stereo component tuner assembly as shown in the illustration.

Installation

INSTALLATION

PROCEDURE

1. INSTALL STEREO COMPONENT TUNER ASSEMBLY

(a) Engage the 2 guides to install the stereo component tuner assembly.

2. INSTALL NO. 2 RADIO RECEIVER BRACKET

(a) Install the No. 2 radio receiver bracket with the 5 bolts.

Torque:

2.5 N·m {25 kgf·cm, 22 in·lbf}

3. INSTALL NO. 1 RADIO RECEIVER BRACKET

(a) Install the No. 1 radio receiver bracket with the 5 bolts.

Torque:

2.5 N·m {25 kgf·cm, 22 in·lbf}

4. INSTALL NO. 1 NAVIGATION WIRE

(a) Connect the 6 connectors to install the No. 1 navigation wire.

5. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET

(See page Steering Pad Switch )

    Related Tacoma materials

    Removal
    REMOVAL PROCEDURE 1. PRECAUTION CAUTION: Be sure to read Precaution thoroughly before servicing (See page ). NOTICE: After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the ...

    Certification Ecu
    Components COMPONENTS ILLUSTRATION Installation INSTALLATION PROCEDURE 1. INSTALL CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) (a) Install the certification ECU (smart key ECU assembly) with the 2 nuts. Torque: 6.5 N·m {66 kgf·cm, 58 in·lbf} (b) Engage the clamp to install the wire ...

    Downhill Assist Control system
    The downhill assist control system helps to prevent excessive speed on steep downhill descents. ■ System operation The system will operate when the vehicle is traveling under 15 mph (25 km/h) and the front-wheel drive control switch is in the L4 position. Press the DAC switch. The ind ...