TTGuideTacoma manuals & technical reference
Toyota Tacoma (2015-2018) Service Manual / Tire And Wheel / Tire Pressure Warning System / Receiver Error (C2176/76)

Toyota Tacoma (2015-2018) Service Manual: Receiver Error (C2176/76)

DESCRIPTION

Tire pressure warning valve and transmitter signals are transmitted to the tire pressure warning ECU and receiver in the vehicle as radio waves.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

Note

C2176/76

Receiver Error

Malfunction in the tire pressure warning ECU and receiver internal circuit

Tire pressure warning ECU and receiver

-

CAUTION / NOTICE / HINT

NOTICE:

  • When replacing the tire pressure warning ECU and receiver, read the transmitter IDs stored in the old ECU using the Techstream and write them down before removal.
  • It is necessary to perform initialization (See page ) of the transmitter IDs into the tire ) after registration (See page pressure warning ECU and receiver if the ECU has been replaced. ) of the transmitter IDs into the tire pressure warning ECU and receiver if the ECU has been replaced.

PROCEDURE

1.

CHECK AND REPLACE DTC OUTPUT (C2176/76)

(a) Clear the DTCs (See page (b) Turn the ignition switch off. ).

(b) Turn the ignition switch off.

(c) Turn the ignition switch to ON and check for DTCs (See page OK: ).

OK:

DTC C2176/76 is not output.

OK

END
NG

REPLACE TIRE PRESSURE WARNING ECU AND RECEIVER

    Related Tacoma materials

    Listening to Bluetooth® audio
    The Bluetooth® audio system enables the user to enjoy music played on a portable player from the vehicle speakers via wireless communication. Select “ Audio” on the “Select Audio Source” screen. When a Bluetooth® device cannot be connected, check the connection status on the “Bluet ...

    Dtc Check / Clear
    DTC CHECK / CLEAR HINT: When using the Techstream with the engine switch off to troubleshoot: Connect the Techstream to the DLC3 and turn a courtesy light switch on and off at 1.5 second intervals until communication between the Techstream and vehicle begins. Refer to the T ...

    Removal
    REMOVAL PROCEDURE 1. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY RH (See page ) 2. REMOVE LOWER INSTRUMENT PANEL ASSEMBLY (See page ) 3. REMOVE AIR CONDITIONING CONTROL ASSEMBLY (a) for Automatic Air Conditioning System (See page ) (b) for Manual Air Conditioning System (Se ...