Installation
INSTALLATION
PROCEDURE
1. INSTALL REAR AXLE HUB BOLT
(a) Install a new hub bolt through the axle hub.
(b) Install the washer plate, as shown in the illustration, through the hub bolt, and install the hub bolt by tightening the hub nut.
2. APPLY HIGH TEMPERATURE GREASE
.gif)
3. INSTALL REAR BRAKE SHOE
4. INSTALL FRONT BRAKE SHOE
5. INSPECT REAR DRUM BRAKE INSTALLATION
6. INSTALL REAR BRAKE DRUM SUB-ASSEMBLY
7. ADJUST REAR DRUM BRAKE SHOE CLEARANCE
8. INSTALL REAR WHEEL
Torque:
113 N·m {1152 kgf·cm, 83 ft·lbf}
9. INSPECT PARKING BRAKE LEVER TRAVEL
10. ADJUST PARKING BRAKE LEVER TRAVEL
Removal
REMOVAL
PROCEDURE
1. REMOVE REAR WHEEL
2. REMOVE REAR BRAKE DRUM SUB-ASSEMBLY
.gif)
3. REMOVE FRONT BRAKE SHOE
4. REMOVE REAR BRAKE SHOE
5. REMOVE REAR AXLE HUB BOLT
(a) Using SST, remove the hub bolt.
SST: 09650-17011
