TTGuideTacoma manuals & technical reference
Toyota Tacoma (2015-2018) Service Manual / Navigation / Multi Info Display / Navigation System / Panel Switches do not Function

Toyota Tacoma (2015-2018) Service Manual: Panel Switches do not Function

PROCEDURE

1.

CHECK PANEL SWITCH

(a) Check for foreign matter around the switches that might prevent operation.

OK:

No foreign matter is found.

NG

REMOVE ANY FOREIGN MATTER FOUND
OK

2.

CHECK PANEL SWITCH (OPERATION CHECK)

(a) Enter the "Panel & Steering Switch Check Mode" screen. Refer to Check Panel & Steering Switch in Operation Check (See page ).

(b) Operate the abnormal switch and check if the switch status is correctly displayed.

OK:

The switch status is correctly displayed as operated.

OK

REPLACE NAVIGATION RECEIVER ASSEMBLY

NG

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

    Related Tacoma materials

    Mechanical System Tests
    MECHANICAL SYSTEM TESTS 1. STALL SPEED TEST HINT: This test is to check the overall performance of the engine and transmission. CAUTION: This test should be done on a paved surface (a surface that is not slippery). To ensure safety, perform this test in an open and level area tha ...

    Open in One Side of Bus 5 Branch Line
    DESCRIPTION When the CAN bus main lines are normal (no open, short to ground, short to +B or short between lines) and there is an ECU or sensor on the "Communication Bus Check" screen that is indicated as not communicating or whose connection status on the "Communication Bus Ch ...

    If the engine will not start
    If the engine still does not start after following the correct starting procedure (→P. 141) or releasing the steering lock (→P. 142), confirm the following points. ■ The engine will not start even when the starter motor operates normally. One of the following may be the cause o ...