TTGuideTacoma manuals & technical reference
Toyota Tacoma (2015-2018) Service Manual / Rc62f Manual Transmission / Transaxle / Neutral Position Switch

Toyota Tacoma (2015-2018) Service Manual: Neutral Position Switch

Components

COMPONENTS

ILLUSTRATION

*1

NEUTRAL POSITION SWITCH

*2

GASKET

N*m (kgf*cm, ft.*lbf): Specified torque

●

Non-reusable part

Installation

INSTALLATION

PROCEDURE

1. INSTALL NEUTRAL POSITION SWITCH

(a) Using SST, install the neutral position switch and a new gasket to the transmission case.

SST: 09817-16011

Torque:

40.2 N·m {410 kgf·cm, 30 ft·lbf}

(b) Connect the connector.

Removal

REMOVAL

PROCEDURE

1. REMOVE NEUTRAL POSITION SWITCH

(a) Disconnect the connector.

(b) Using SST, remove the neutral position switch and gasket from the transmission case.

SST: 09817-16011
    Related Tacoma materials

    Transmitter ID1 Operation Stop (C2111/11-C2114/14)
    DESCRIPTION The tire pressure warning valve and transmitters that are installed in the tire and wheel assemblies measure the tire pressure of each wheel. The measured values are transmitted to the tire pressure warning ECU and receiver in the vehicle as radio waves. The ECU compares the measu ...

    Under Hood
    General Maintenance GENERAL MAINTENANCE PROCEDURE 1. GENERAL NOTES Maintenance items may vary from country to country. Check the owner's manual supplement in which the maintenance schedule is shown. Every service item in the periodic maintenance schedule must be performed. ...

    Washer Motor
    Components COMPONENTS ILLUSTRATION On-vehicle Inspection ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY HINT: This check should be performed with the windshield washer motor and pump assembly installed to the windshield washer jar assembly. ...