Opel Insignia B 2018-2022 Owners Manual: Interior Lighting
Instrument Panel Illumination Control
.png)
The brightness of the instrument cluster display, infotainment display and controls, steering wheel controls, and all other illuminated controls, as well as feature status indicators can be adjusted.
The knob for this feature is on the instrument panel beside the steering column.
Press to extend the knob, then turn it clockwise or counterclockwise to brighten or dim the lights.
Dome Lamps
.png)
The dome lamp controls are in the overhead console.
To operate, press the following
buttons:
.png)
OFF : Press to turn off the
dome lamps when a door is open.
An indicator light on the button will
turn on when the dome lamp
override is activated. Press .png)
OFF again to deactivate this feature
and the indicator light will turn off.
The dome lamps will come on when doors are opened.
.png)
ON/OFF : Press to turn the dome
lamps on manually.
Reading Lamps
Front Reading Lamps
There are front reading lamps on the overhead console.
.png)
Press the lamp lenses to turn the front reading lamps on or off.
Rear Reading Lamps
The rear reading lamps are in the headliner either over the rear seats or over the rear doors.
.png)
.png)
Press the lamp lenses to turn the rear reading lamps on or off.
Exterior Lighting
Exterior Lamp Controls
The exterior lamp control is on the
instrument panel to the left of the
steering column.
There are four positions.
: Turns the exterior lamps off and
deactivates the AUTO mo ...
Lighting Features
Entry Lighting
Some exterior lamps and most of
the interior lamps turn on briefly at
night or in areas with limited lighting
when the Remote Keyless Entry
(RKE) transmitter button is
pressed.
After
...
Other materials:
Starting System
Parts Location
PARTS LOCATION
ILLUSTRATION
ILLUSTRATION
Precaution
PRECAUTION
1. IGNITION SWITCH EXPRESSIONS
(a) The type of ignition switch used on this model differs depending on the specifications
of the vehicle. The expressions listed in the table below are used in this section. ...
Reassembly
REASSEMBLY
PROCEDURE
1. INSTALL FRONT BUMPER COVER INSERT LH
(a) Engage the clip to install the front bumper cover insert LH.
(b) Install the bolt.
Torque:
5.9 N·m {60 kgf·cm, 52 in·lbf}
2. INSTALL FRONT BUMPER COVER INSERT RH
HINT:
U ...
Front Camera Module Circuit (C1AA0)
DESCRIPTION
The millimeter wave radar sensor assembly receives information about the area
in front of the vehicle from the forward recognition camera.
If the millimeter wave radar sensor assembly detects a malfunction in the forward
recognition camera, it will store DTC C1AA0.
DTC ...
