TTGuideTacoma manuals & technical reference
Toyota Tacoma (2015-2018) Service Manual / Window / Glass / Power Window Control System(w/ Jam Protection Function) / Glass Position Initialization Incomplete (B2313)

Toyota Tacoma (2015-2018) Service Manual: Glass Position Initialization Incomplete (B2313)

DESCRIPTION

The power window regulator motor assembly is operated by the power window regulator master switch assembly or power window regulator switch assembly. The power window regulator motor assembly has motor, regulator and ECU functions.

When the ECU determines that the power window regulator motor assembly has not been initialized, DTC B2313 is set.

HINT:

DTC B2313 can be stored in each power window regulator motor assembly (power window ECU).

D-Door Motor (Front Power Window Regulator Motor Assembly LH)

DTC No.

DTC Detection Condition

Trouble Area

B2313
  • Power window regulator motor assembly not initialized
  • Power window regulator motor assembly malfunctions
  • Front power window regulator motor assembly LH not initialized
  • Front power window regulator motor assembly LH
P-Door Motor (Front Power Window Regulator Motor Assembly RH)

DTC No.

DTC Detection Condition

Trouble Area

B2313
  • Power window regulator motor assembly not initialized
  • Power window regulator motor assembly malfunctions
  • Front power window regulator motor assembly RH not initialized
  • Front power window regulator motor assembly RH

CAUTION / NOTICE / HINT

NOTICE:

  • DTC B2313 is stored in each power window regulator motor assembly.
  • If the battery is disconnected while the ignition switch is on (IG), DTC B2313 is stored.
  • If a power window regulator motor assembly has been replaced with a new one, initialize the power window control system (See page The power window control system uses the LIN communication system. Inspect ).
  • The power window control system uses the LIN communication system. Inspect the communication function by following How to Proceed with Troubleshooting. Troubleshoot the power window control system after confirming that the communication system is functioning properly (See page ).

PROCEDURE

1.

PERFORM INITIALIZATION (APPLICABLE LOCATION)

(a) Turn the ignition switch to ON.

(b) Initialize the power window regulator motor assembly (See page HINT: ).

HINT:

Initialize the power window regulator motor assembly that has DTC B2313 stored in its ECU.

NEXT

2.

CHECK DTC OUTPUT

(a) Turn the ignition switch off.

(b) Wait for at least 10 seconds, and then turn the ignition switch to ON.

(c) Check for DTCs (See page HINT: ).

HINT:

Check for DTCs for the power window regulator motor assembly that has DTC B2313 stored in its ECU.

OK:

B2313 output does not recur.

Result

Result

Proceed to

OK

A

NG (Driver side power window)

B

NG (Front passenger side power window)

C
A

END (POWER WINDOW CONTROL SYSTEM HAS NOT BEEN INITIALIZED)
B

REPLACE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH

C

REPLACE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH

    Related Tacoma materials

    Components
    COMPONENTS ILLUSTRATION *1 INSTRUMENT LOWER PANEL ASSEMBLY *2 INSTRUMENT PANEL LOWER CENTER FINISH PANEL *3 NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY *4 REAR NO. 2 POWER WINDOW REGULATOR SWITCH ASSEMB ...

    Seat Belt Safety and Warnings
    Before driving the Toyota Tacoma, make sure that every occupant is properly seated and wearing a seat belt. Correct use of the seat belts is an essential part of occupant protection and helps reduce the risk of serious injury during sudden braking, abrupt steering maneuvers, or a collision. WARNING ...

    Motor Circuit Malfunction (C1428)
    DESCRIPTION DTC No. Detection Item DTC Detection Condition Trouble Area C1428 Motor Circuit Malfunction With the motor relay and motor fail-safe relay OFF, open or short in motor circuit continues for 2 seconds o ...