TTGuideTacoma manuals & technical reference
Toyota Tacoma (2015-2018) Service Manual / Cruise Control / Forward Recognition Camera System / Front Camera Module Circuit (C1AA0)

Toyota Tacoma (2015-2018) Service Manual: Front Camera Module Circuit (C1AA0)

DESCRIPTION

When an internal malfunction is detected in the forward recognition camera, DTC C1AA0 is stored.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

C1AA0

Front Camera Module Circuit

3 seconds after the ignition switch is turned to ON, the forward recognition camera detects an internal malfunction.

Forward recognition camera

CAUTION / NOTICE / HINT

NOTICE:

  • When replacing the forward recognition camera, always replace it with a new one. If a forward recognition camera which was installed to another vehicle is used, the information stored in the forward recognition camera will not match the information from the vehicle. As a result, a DTC may be stored.
  • If the forward recognition camera has been replaced with a new one, be sure to perform Forward Recognition Camera Axis Adjustment.

    Click here

PROCEDURE

1.

CHECK FOR DTCs (FORWARD RECOGNITION CAMERA SYSTEM)

(a) Clear the DTCs.

Click here (b) Make sure that the DTC detection conditions are met.

(b) Make sure that the DTC detection conditions are met.

HINT:

If the conditions are not met, the system cannot detect the malfunction.

(c) Check for DTCs.

Click here

Result

Proceed to

DTC C1AA0 is not output

A

DTC C1AA0 is output

B
A

USE SIMULATION METHOD TO CHECK

B

2.

REPLACE FORWARD RECOGNITION CAMERA

(a) Replace the forward recognition camera.

Click here (b) Perform forward recognition camera axis adjustment.

(b) Perform forward recognition camera axis adjustment.

Click here

NEXT

END
    Related Tacoma materials

    Fail-safe Chart
    FAIL-SAFE CHART 1. FAIL SAFE OPERATION If there is a problem with any sensor signals or hydraulic brake booster systems, the skid control ECU prohibits the power supply to the actuator in the hydraulic brake booster and informs the ECM of VSC system failure. The hydraulic brake b ...

    Low Pitched Horn
    Components COMPONENTS ILLUSTRATION Inspection INSPECTION PROCEDURE 1. INSPECT LOW PITCHED HORN ASSEMBLY (a) Check the operation. (1) Apply battery voltage to the terminal 1 and body ground, and check that the low pitched horn assembly sounds. Text in Illustration ...

    Evaporator Temperature Sensor Circuit (B1413/13)
    DESCRIPTION The cooler thermistor sensor (evaporator temperature sensor) is installed on the evaporator in the air conditioner unit to detect the temperature of the cooled air that has passed through the evaporator and is used to control the air conditioning. It sends signals to the air condi ...