TTGuideTacoma manuals & technical reference
Toyota Tacoma (2015-2018) Service Manual / Can Communication / Can Communication System / ECU Malfunction (B1003)

Toyota Tacoma (2015-2018) Service Manual: ECU Malfunction (B1003)

DESCRIPTION

DTC No.

DTC Detection Condition

Trouble Area

B1003

A malfunction in the non-volatile storage of the central gateway ECU (network gateway ECU) is detected.

Central gateway ECU (network gateway ECU)

PROCEDURE

1.

CHECK DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / Central Gateway / Trouble Codes.

OK:

DTC B1003 is not output.

OK

USE SIMULATION METHOD TO CHECK

NG

REPLACE CENTRAL GATEWAY ECU (NETWORK GATEWAY ECU)

    Related Tacoma materials

    Power outlets (12 VDC)
    Please use as a power supply for electronic goods that use less than 12 VDC/10 A (power consumption of 120 W). When using electronic goods, make sure that the power consumption of all the connected power outlets is less than 120 W. ■The power outlets can be used when The engine switch ...

    Dtc Check / Clear
    DTC CHECK / CLEAR CHECK DTC (a) Connect the Techstream to the DLC3. (b) Turn the ignition switch to ON. (c) Turn the Techstream on. (d) Enter the following menus: Body Electrical / Pre-Collision 2 / Trouble Codes. (e) Check for DTCs. Click here CLEAR DTC (a) Connect the Techstream to the ...

    Engine Coolant Temperature Receiver Gauge Malfunction
    DESCRIPTION In this circuit, the meter CPU receives engine coolant temperature signals from the ECM using the CAN communication system (CAN V1 Bus). The meter CPU displays engine coolant temperature that is calculated based on the data received from the ECM. WIRING DIAGRAM CAUTION / NOTIC ...