TTGuideTacoma manuals & technical reference
Toyota Tacoma (2015-2018) Service Manual / 2gr-fks Charging / Charging System / Dtc Check / Clear

Toyota Tacoma (2015-2018) Service Manual: Dtc Check / Clear

DTC CHECK / CLEAR

1. CHECK DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn the Techstream on.

(d) Enter the following menus: Powertrain / Engine / Trouble Codes.

(e) Check for DTCs, and then write them down.

(f) Check the details of the DTCs (See page ). ).

2. CLEAR DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn the Techstream on.

(d) Enter the following menus: Powertrain / Engine / Trouble Codes.

(e) Clear the DTCs.

    Related Tacoma materials

    Pressure Sensor or Switch (C1254)
    DESCRIPTION The accumulator pressure sensor is connected to the skid control ECU in the master cylinder solenoid. DTC No. DTC Detecting Condition Trouble Areas C1254 Accumulator pressure sensor fault (Fluid pressure does not chang ...

    Short in Torque Converter Clutch Solenoid Circuit (Shift Solenoid Valve SL) (P2769,P2770)
    DESCRIPTION Shift solenoid valve SL is turned on and off by signals from the ECM to control the hydraulic pressure acting on the lock-up relay valve, which then controls operation of the lock-up clutch. DTC No. DTC Detection Condition Trouble Area ...

    Removal
    REMOVAL PROCEDURE 1. REMOVE NO. 2 ENGINE UNDER COVER SUB-ASSEMBLY (w/ Off Road Package) 2. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY 3. DRAIN ENGINE COOLANT 4. REMOVE RADIATOR GRILLE (See page ) 5. REMOVE V-BANK COVER SUB-ASSEMBLY 6. REMOVE RADIATOR SUPPORT TO FRAME SEAL 7. R ...