Toyota Tacoma (N400, 2024-2026) Owner's Manual: Dashboard, Console and Steering Wheel Switches

This switch-group illustration identifies several Toyota Tacoma controls located around the driver's side of the instrument panel. Some switches are available only on vehicles equipped with the corresponding feature, so the exact arrangement may vary.

1. Headlight leveling dial
   Control for adjusting the headlight leveling setting
2. Instrument panel light control switch
   Switch used to adjust instrument panel illumination
3. Automatic High Beam switch
   Control for the Automatic High Beam function
4. VSC OFF switch
   Switch associated with turning the VSC function off as described in the relevant section
5. AC 120V switch*
   Control for the available AC 120V feature
6. Power tailgate opener switch*
   Switch for the available power tailgate opener
7. Auxiliary switches*
   Optional auxiliary switch controls
8. Cargo lamp main switch
   Main control for the cargo lamp
9. Power running boards switch*
   Control for vehicles equipped with power running boards
10. Trailer brake control switch*
    Switch associated with the available trailer brake control system

*: If equipped

The center-console switch layout groups controls for braking, selectable operating modes, towing-related functions, camera functions, and available off-road systems. Equipment varies by Toyota Tacoma configuration, and controls marked with an asterisk apply only when the corresponding feature is installed.

1. Parking brake switch
   Applying and releasing the parking brake
   Precautions for use during the winter season
   Understanding associated warning buzzers and messages
2. Brake hold switch
   Control for the brake hold function
3. Mode select switch*
   Switch for selecting an available operating mode
4. Mode switch*
   "TOW HAUL" switch*
   "DRIVE MODE" switch*
   "MTS" (Multi-terrain Select) switch*
   "DAC/CRAWL" switch*
   "iMT" (Intelligent Manual Transmission) switch*
   "ECT PWR" switch*
5. Front-wheel drive control switch*
   Control switch for the applicable drive system
6. Trailer Backup Guide switch*
   Switch for the available Trailer Backup Guide function
7. Camera switch*
   Control for the available camera function
8. Rear differential lock switch*
   Switch for the available rear differential lock
9. SDM
   (Stabilizer with Disconnection Mechanism) switch*
   Control for vehicles equipped with the Stabilizer with Disconnection Mechanism
10. Stop & Start cancel switch*
    Switch used to cancel the available Stop & Start function
11. "CLUTCH START" cancel switch*
    Control for canceling the available "CLUTCH START" function

*: If equipped

The driver's door switch panel provides convenient access to the exterior mirror, door lock, and power window controls. The illustration below identifies each switch by its primary function.

1. Outside rear view mirror switches
   Controls for adjusting the outside rear view mirrors
2. Door lock switches
   Controls for locking and unlocking the doors
3. Power window switches
   Switches used to operate the power windows
4. Window lock switch
   Control used to restrict operation of the applicable passenger windows

The steering wheel switch layout places frequently used driver-information, cruise-control, communication, and audio controls within reach while driving. Available multimedia-related functions are described in the separate multimedia owner's manual.

1. Meter control switches
   Controls used to operate and navigate applicable meter display functions
2. Phone switch*
   Cruise control switches
   Controls associated with Dynamic Radar Cruise Control
   Controls associated with cruise control
3. LTA (Lane Tracing Assist) switch
   Switch for operating the Lane Tracing Assist function
4. Audio remote control switches*
   Steering wheel controls for available audio functions
5. Talk switch*
   Switch for available voice-related multimedia operation

*: Refer to "MULTIMEDIA OWNER'S MANUAL".