TTGuideTacoma manuals & technical reference
Toyota Tacoma (2015-2018) Service Manual / Park Assist / Monitoring / Blind Spot Monitor System / Blind Spot Monitor Slave Module (C1AB7)

Toyota Tacoma (2015-2018) Service Manual: Blind Spot Monitor Slave Module (C1AB7)

DESCRIPTION

This DTC is stored when the blind spot monitor sensor RH detects an internal malfunction.

DTC Code

DTC Detection Condition

Trouble Area

C1AB7

The blind spot monitor sensor RH (slave) detects an internal malfunction.

Blind spot monitor sensor RH

CAUTION / NOTICE / HINT

NOTICE:

When checking for DTCs, make sure that the blind spot monitor main switch assembly (warning canceling switch assembly) is on.

PROCEDURE

1.

CHECK DTC

(a) Clear the DTCs (See page (b) Recheck for DTCs and check if the same DTC is output again (See page ).

(b) Recheck for DTCs and check if the same DTC is output again (See page OK: ).

OK:

No DTCs are output.

OK

USE SIMULATION METHOD TO CHECK

NG

REPLACE BLIND SPOT MONITOR SENSOR RH

    Related Tacoma materials

    Precaution
    PRECAUTION PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE BATTERY TERMINAL NOTICE: When disconnecting the cable from the negative (-) battery terminal, initialize the following systems after the cable is reconnected. Click here IGNITION SWITCH EXPRESSIONS (a) The type of ignition switch ...

    System Description
    SYSTEM DESCRIPTION 1. FUNCTION OF MAIN COMPONENTS Component Function Vertical mirror motor Moves the mirror surface vertically in accordance with the vertical mirror motor outer mirror switch assembly operation. Horizontal mirr ...

    Wireless remote control*
    The wireless remote control can be used to lock and unlock the vehicle from outside the vehicle. Locks all doors Unlocks all doors Pressing the button unlocks the driver’s door. Pressing the button again within 3 seconds unlocks the other doors. Sounds alarm (push and hold) ■Op ...