Toyota Tacoma manuals

Opel Insignia B 2018-2023 Owners Manual: Additional Maintenance and Care

Your vehicle is an important investment and caring for it properly may help to avoid future costly repairs. To maintain vehicle performance, additional maintenance services may be required.

It is recommended that your dealer perform these services - their trained dealer technicians know your vehicle best. Your dealer can also perform a thorough assessment with a multi-point inspection to recommend when your vehicle may need attention.

The following list is intended to explain the services and conditions to look for that may indicate services are required.

Battery

The 12-volt battery supplies power to start the engine and operate any additional electrical accessories.

Belts

Brakes

Brakes stop the vehicle and are crucial to safe driving.

Fluids

Proper fluid levels and approved fluids protect the vehicle's systems and components. See Recommended Fluids and Lubricants for GM approved fluids.

Hoses

Hoses transport fluids and should be regularly inspected to ensure that there are no cracks or leaks.

With a multi-point inspection, your dealer can inspect the hoses and advise if replacement is needed.

Lamps

Properly working headlamps, taillamps, and brake lamps are important to see and be seen on the road.

Shocks and Struts

Shocks and struts help aid in control for a smoother ride.

Tires

Tires need to be properly inflated, rotated, and balanced. Maintaining the tires can save money and fuel, and can reduce the risk of tire failure.

Vehicle Care

To help keep the vehicle looking like new, vehicle care products are available from your dealer. For information on how to clean and protect the vehicle's interior and exterior, see Interior Care and Exterior Care.

Wheel Alignment

Wheel alignment is critical for ensuring that the tires deliver optimal wear and performance.

Windshield

For safety, appearance, and the best viewing, keep the windshield clean and clear.

Wiper Blades

Wiper blades need to be cleaned and kept in good condition to provide a clear view.

Recommended Fluids, Lubricants, and Parts

Recommended Fluids and Lubricants

Maintenance Replacement

Maintenance Replacement Parts

Replacement parts identified below by name, part number, or specification can be obtained from your dealer.

Maintenance Records

Maintenance Records

After the scheduled services are performed, record the date, odometer reading, who performed the service, and the type of services performed in the boxes provided. Retain all maintenance receipts.

Technical Data

Maintenance Schedule
Owner Checks and Services At Each Fuel Stop Check the engine oil level. Once a Month Check the tire inflation pressures. Inspect the tires for wear. Check the windshield washer fluid level. ...

Technical Data
Vehicle Identification Vehicle Identification Number (VIN) This legal identifier is in the front corner of the instrument panel, on the driver side of the vehicle. It can be seen through the windsh ...

Other materials:

Installation
INSTALLATION PROCEDURE 1. INSTALL VACUUM WARNING SWITCH ASSEMBLY (for 2GR-FKS) Click here 2. INSTALL BRAKE VACUUM CHECK VALVE ASSEMBLY (for 2TR-FE) (a) Install a new grommet onto the brake booster assembly. (b) Install the vacuum check val ...

Side Moulding
Components COMPONENTS ILLUSTRATION ILLUSTRATION Removal REMOVAL CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH side and LH side. The following procedure is for the LH side. When removing the lower No. 2 side panel moulding, heat the vehicle body a ...

Pressure Control Solenoid "G" Actuator Stuck Off (P28077F)
SYSTEM DESCRIPTION The ECM uses the vehicle speed signal and signals from the transmission revolution sensors (NT, SP2) to detect the actual gear (1st, 2nd, 3rd, 4th, 5th or 6th gear). The ECM compares the actual gear with the shift schedule in the ECM memory to detect mechanical problems of t ...

В© 2011-2023 Copyright www.ttguide.net