Toyota Tacoma manuals

Toyota Tacoma 2015-2018 Service Manual: Vehicle Control History

VEHICLE CONTROL HISTORY

VEHICLE CONTROL HISTORY

(a) A part of the control history can be confirmed using the vehicle control history.

Click here Brake Switch "A" Circuit Open (P057113)

Lost Communication with Vehicle Dynamics Control Module Missing Message (U012287)
DESCRIPTION The ECM receives signals from the skid control ECU (brake actuator assembly) via CAN communication. DTC No. DTC Detection Condition Trouble Area ...

Brake Switch "A" Circuit Open (P057113)
DESCRIPTION DTC No. DTC Detection Condition Trouble Area MIL Note P057113 Vehicle Condition: Cruise ...

Other materials:

Steering Angle Sensor Internal Circuit (C1433)
DESCRIPTION Steering angle sensor (spiral cable with sensor sub-assembly) signals are sent to the skid control ECU (master cylinder solenoid) via the CAN communication system. When there is a malfunction in the CAN communication system, it is detected by the steering angle sensor (spiral cabl ...

Door Courtesy Switch Circuit
DESCRIPTION The main body ECU (multiplex network Body ECU) receives a door open or closed signal from each door courtesy light switch. WIRING DIAGRAM CAUTION / NOTICE / HINT NOTICE: Recognition code registration is necessary when replacing the main body ECU (multiplex network bo ...

If the vehicle battery is discharged
The following procedures may be used to start the engine if the vehicle’s battery is discharged. You can call your Toyota dealer or qualified repair shop. If you have a set of jumper (or booster) cables and a second vehicle with a 12-volt battery, you can jump start your Toyota following the ...

© 2011-2020 Copyright www.ttguide.net