Toyota Tacoma (2015-2018) Service Manual: Problem Symptoms Table
PROBLEM SYMPTOMS TABLE
HINT:
Proceed to the troubleshooting for each circuit in the table below.
|
Symptom |
Suspected Area |
See page |
|---|---|---|
|
Passenger seat occupant conditions and displayed passenger airbag ON/OFF indicator do not correspond |
Trouble in Passenger Airbag ON/OFF Indicator |
|
.gif)
Dtc Check / Clear
DTC CHECK / CLEAR
1. DTC CHECK
HINT:
When DTC B1650/23 is detected as a result of troubleshooting for the
airbag system, troubleshoot the occupant classification system.
Use the Tec ...
Terminals Of Ecu
TERMINALS OF ECU
1. OCCUPANT DETECTION ECU
Symbols (Terminal No.)
Wiring Color
Terminal Description
Condition
Specification
...
Other materials:
Installation
INSTALLATION
PROCEDURE
1. INSTALL OIL COOLER ASSEMBLY (w/ Air Cooled Transmission Oil Cooler)
(a) Install the 2 oil cooler brackets to the oil cooler assembly with the 2 bolts.
Torque:
5.5 N·m {56 kgf·cm, 49 in·lbf}
(b) Install the oil cooler assembly to the vehicle body with th ...
Data List / Active Test
DATA LIST / ACTIVE TEST
1. DATA LIST
HINT:
Using the Techstream to read the Data List allows the values or states of switches,
sensors, actuators and other items to be read without removing any parts. This non-intrusive
inspection can be very useful because intermittent conditions or signals ...
TC and CG Terminal Circuit
DESCRIPTION
The DLC3 circuit enables reading of Diagnostic Trouble Codes (DTCs) with no Techstream
by connecting terminals TC and CG of the DLC3 connector.
Stored DTCs are displayed in blinking patterns of the CRUISE MAIN indicator light
located on the combination meter.
WIRING DIAGRAM
HIN ...
