Toyota Tacoma manuals

Toyota Tacoma 2015-2018 Service Manual: Components

COMPONENTS

ILLUSTRATION

On-vehicle Inspection
Camshaft Oil Control Valve(for Intake Side Of Bank 2)
...

On-vehicle Inspection
ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT CAMSHAFT TIMING GEAR BOLT (a) Remove the camshaft timing oil control solenoid assembly (See page ). (b) Check that the plunger strokes when ...

Other materials:

Inspection
INSPECTION PROCEDURE 1. INSPECT TIE ROD END SUB-ASSEMBLY (a) Flip the ball joint stud back and forth 5 times as shown in the illustration before installing the nut. (b) Using a torque wrench, turn the nut continuously at a rate of 2 to 4 seconds per turn and check the torque reading on the ...

Terminals Of Ecu
TERMINALS OF ECU FORWARD RECOGNITION CAMERA NOTICE: DTCs may be output when connectors are disconnected during inspection. Therefore, be sure to clear the DTCs using the Techstream once the inspection has been completed. Do not apply excessive force to the forward recognition ...

Lubrication System
On-vehicle Inspection ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT ENGINE OIL LEVEL (a) Warm up the engine, and then stop the engine and wait for 5 minutes. (b) Check that the engine oil level is between the low level and full level marks on the dipstick. If low, check for leakage and add en ...

В© 2011-2019 Copyright www.ttguide.net